Playstation 3 Hdmi No Picture After Blue Ray Disc
Video Output Settings
Adjust the system's video output settings. Select the best output settings for the TV in use.
1. | Check the resolution supported by your TV. | |||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2. | Select (Settings) > (Display Settings). | |||||||||||||||||||||||||||
3. | Select [Video Output Settings]. | |||||||||||||||||||||||||||
4. | Select the connector type on your TV.
| |||||||||||||||||||||||||||
5. | Set the 3D TV display size. | |||||||||||||||||||||||||||
6. | Change video output settings.
| |||||||||||||||||||||||||||
7. | Set the resolution. If [Composite / S Video] is selected in step 4, the screen for selecting resolutions will not be displayed.
| |||||||||||||||||||||||||||
8. | Set the TV type.
| |||||||||||||||||||||||||||
9. | Check your settings.
| |||||||||||||||||||||||||||
10. | Save your settings. |
Hints
- If the video output settings do not match those required for the TV in use, the screen may go blank when the resolution is changed. The screen should, however, automatically go back to its original resolution after a while. If the screen remains blank for more than 30 seconds, turn off the system. Then touch the power button on the system front for at least five seconds to turn the system on again. The video output settings will automatically be reset to the standard resolution.
- If a device that is not compatible with the HDCP (High-bandwidth Digital Content Protection) standard is connected to the system using an HDMI cable, video and/or audio cannot be output from the system.
- Copyright-protected content on a Blu-ray Disc can only be output at 1080p when using an HDMI cable connected to a device that is compatible with the HDCP standard.
- When the PS3™ system (CECH-3000 / 4000 series) is connected to a TV using a D-terminal cable, a component AV cable, or an multi AV cable (a Sony Corporation product), analogue high-definition output is restricted to comply with the copyright protection technology used by Blu-ray™ (AACS). BD video software (BD-ROM) and BDs recorded with copyright-protected video content (such as broadcast programs) are output at 480i.
- Connect the system (CECH-4200 series or later) using an HDMI cable to output BD video software (BD-ROM) and BDs recorded with copyright-protected video content.
Source: https://manuals.playstation.net/document/en/ps3/current/settings/videooutput.html
0 Response to "Playstation 3 Hdmi No Picture After Blue Ray Disc"
Post a Comment